HMW 15.0 PHT – K Winch

HMW 15.0 PHT-K Winch

The HMW 15.0 PHT-K winch is a heavy-duty winch designed for a variety of industrial applications. Built with high-quality materials and advanced features, this winch is capable of handling heavy loads with ease.

Technical Specifications

The HMW 15.0 PHT-K winch has a maximum line pull capacity of 15,000 kilograms. It is powered by a hydraulic motor that operates at a maximum pressure of 3,000 PSI (207 bar). The winch also has a maximum flow rate of 12 gallons per minute (45 liters per minute), which ensures fast and efficient operation.

The winch drum is made of high-strength steel and measures 7 inches (177.8 millimeters) in diameter and 12.5 inches (317.5 millimeters) in length. It is designed to accommodate up to 200 feet (61 meters) of 1/2-inch (12.7 millimeters) wire rope.


  • Roller Fairlead
  • Cable Tensioner
  • Manual Clutch

Hydraulic Inlets

  • G 1/2″


  • Air Clutch
  • IP67 – IP 68
  • Pneumatic

Mounting Bolts

  • 16 Pieces M16 8,8


Max. pulling capacity (kg/Ibs):15000 kg (33062 Ibs)
Max. rope length (m/ft):30 m (98.4 ft)
Recommended wire rope (mm/in):18 mm (8/11″) 1960Mpa
Hydromotor (cc/in³):250cc (15 in³)
Max. pump flow (L/min-gal/min):60 L/min (15.8 g/min)
Gear ratio:28:1
Oil types and capactiy:85 W 90 – 2 L
Max. working pressure (bar/psi):155 Bar (2248 psi)
Winch (kg/Ibs):163 kg (359.2 Ibs)
Roller Fairlead (kg/lbs):18 kg (39,6 lbs)
Cable Tensioner (kg/Ibs):8 kg (17,6 lbs)

HMW 15.0 PHT – K Manuel Clutch Shifter

HMW 15.0 PHT – K/P Air Clutch Shifter

Technical Features

Winch Features

Rope Winding LayerPulling Capacity (kg/lbs)Rope Speed (m/min-ft/min)Rope Lenght (m/ft)

Pulling Capacity kg/lb Rope Speed m/min-ft/min Rope Lenght m/ft

Technical Document

  • Extra reinforced steel cast body.
  • Lightweight and strong design.
  • 100% Holding negative-acting hydraulic brake system.
  • Standard pressure roller and roller fairlead.
  • Easy assembly, high rope capacity and high torque hydromotor
  • Standard manual rope unloading system
  • CE Machinery Directive 2006/42/EC
  • Meets SAE J706 rating

HMW 15.0 PHT – K Winch

HMW 15.0 PHT – K Winch Technical Drawing

Draw Request

    Order Form